dbba662c

9.3.2. Check and adjustment level / replacement of oil in assemblies of bridges

Check and replacement have to be made at a heated-up reducer of the bridge.

Peredny Bridge

Location of traffic jams jellied/control (1) and drain (2) openings of a case of the forward bridge

Check

 PERFORMANCE ORDER

  1. Carefully wipe a bridge case surface around a stopper of a jellied/control (1) opening.
  2. Turn out a stopper, - oil level in a case has to reach the lower cut of an opening, in case of need make the corresponding adjustment (use a funnel). Track that the stopper was tightened with the required effort.

Replacement

 PERFORMANCE ORDER

  1. Prepare the drain capacity of suitable volume.
  2. Having wiped a case surface, around both openings, turn out jellied (1) and drain (2) stoppers.
  3. Wait for the termination of an effluence of oil, then screw on the place and tighten a drain stopper (2) with the required effort, - in case of need previously replace a sealing washer.
  4. Through a funnel fill in necessary amount of fresh oil of the required grade in a reducer case, - the level of oil has to reach the lower cut of a jellied/control opening.
  5. Screw and tighten with the required effort a stopper (1).

Zadny Bridge

Location of traffic jams jellied/control (1) and drain (2) openings of a case of the back bridge

The order of performing procedures is similar described above for the forward bridge.

For the purpose of ensuring normal access to a stopper of a jellied/control opening the car has to be lowered on wheels.