dbba662c

9.2.3. Removal and installation of a vacuum receiver of a control system of blocking of differentials

Details of installation of a vacuum receiver of a control system of blocking of differentials

1 — the Cover
2 — Bolts
3 — the Vacuum hose

4 — the Vacuum receiver
5 — the Cut in a boot of a wheel arch

 PERFORMANCE ORDER

  1. Remove a facing frame (cover) of a block headlight (see the Head Kuzov), - only at the left.
  2. Remove a decorative front grille (see the Head Kuzov).
  3. Remove a front bumper (see the Head Kuzov).
  4. Remove a loker of protection of an arch of the left wheel (see the Head Kuzov).
  5. Uncover (1) (two bolts (2) in front and two sideways).
  6. Disconnect a vacuum hose (3) from the motive compartment of the vacuum pump (M40) of the drive of blocking of differentials located in the left forward corner.
  7. Turn out two fixing bolts and remove a vacuum receiver (4) from the wing panel, having accurately passed a vacuum hose (3) in a cut in a boot (5), - try not to damage a hose.
  8. Installation is made upside-down.