dbba662c

9.2.15. Removal and installation of a cover of an intermediate flange

Details of installation of a cover of an intermediate flange

2 — the Top back cover
3 — M8x80 Bolt
4, 7 — M8x50 Bolt
5 — the Cover of an intermediate flange

6 — M8x50 Bolts with a six-sided head
8 — Adjusting washers
M46/2 — the Servomotor of the transfer case

 PERFORMANCE ORDER

  1. Remove assembly of the servomotor (M46/2) of the transfer case (see the Section Removal and installation of the servomotor of the transfer case).
  2. Remove the top back cover (2), - pay attention to distinction of fixing bolts on length.
  3. Uncover an intermediate flange (5), - pay attention to distinction of fixing bolts on length.
  4. Check the size of an axial side play of entrance and intermediate shaft, - in case of need pick up replaceable adjusting washers (8).
  5. Installation is made upside-down.
  6. In conclusion do not forget to make initialization of the servomotor by means of the reader STAR DIGNOSIS, - ask for the help experts branded HUNDRED Mercedes-Benzs.