dbba662c

9.2.12. Removal and installation of a forward cover

Details of installation of a forward cover (6) of the transfer case (on the example of the transfer case of a series 750.653) (1 of 2)

Details of installation of a forward cover of transmission (2 of 2)

1 — the Stopper of a jellied opening
2, 3 — Sealing rings
4 — the Plug
5 — the Epiploon
6 — the Forward cover

7 — the Remote ring
8 — the Ball bearing
9 — the Lock ring
10 — the Leading shaft

 PERFORMANCE ORDER

  1. Remove assembly of the executive cylinder of the drive of blocking of interaxal differential (see the Section Removal and installation of the executive cylinder of the drive of blocking of interaxal differential).
  2. Turn out fixing bolts and remove a forward cover (6).
  3. Take from the landing nest in a cover the ball bearing (8).
  4. Remove a sealing ring (3) and an epiploon (5).
  5. Carefully wipe and examine the removed components, in case of need make replacement.
  6. Installation is made upside-down, - before installation grease an epiploon (4) and sealing rings (2 and 3) with universal lubricant like Molykote.