dbba662c

9.2.11. Removal and installation of the executive cylinder of the drive of blocking of interaxal differential

Details of installation of the executive cylinder of the drive of blocking of interaxal differential (on the example of the transfer case of a series 750.653)

1 — the Executive cylinder
2 — the Pin
3 — Pruzhina
4 — the Nut
5 — the Washer
6 — Pistons

7 — the Diaphragm
8 — the Washer
9 — the Sealing ring
10 — a switching Rod
S76/7 — the Sensor switch of blocking of interaxal differential

 PERFORMANCE ORDER

  1. Remove the transfer case (see the Section Removal and installation of the transfer case).
  2. By means of a suitable stripper dismantle a connecting flange of connection of the driveshaft of the drive of the transfer case.
  3. Release fixing bolts in a diagonal order and remove the executive cylinder (1).
  4. Carefully wipe all components, replace defective knots.
  5. Installation is made upside-down.