dbba662c

9.2.10. Replacement of epiploons

On the example of an epiploon of an output flange of connection of the driveshaft of the drive of the forward bridge (replacement of epiploons of the remained two shaft is made in a similar manner)

Details of installation of epiploons of shaft of the transfer case

1 — the Connecting flange of connection of the driveshaft of the drive of the forward bridge
2 — the Connecting flange of connection of the driveshaft of the drive of the transfer case
3 — the Connecting flange of connection of the driveshaft of the drive of the back bridge of an axis

4 — Persistent washers
5 — Epiploons

 PERFORMANCE ORDER

  1. Disconnect from the transfer case driveshafts (see the Section Detachment and connection of driveshafts on the transfer case).
  2. Previously having marked its adjusting situation, remove a connecting flange (10), - in case of need use a stripper.
  3. By means of a suitable extractor remove an epiploon (5).
  4. Installation is made upside-down. For landing of an epiploon use a suitable mandrel (an epiploon previously grease with universal lubricant like Molykote). Before installation of a flange fill in it bolts of fastening of the driveshaft.