dbba662c

8.9. Removal and installation of a cooler of ATF

Details of installation of a cooler of ATF (except models 463.246)

1 — the Cap nut of the nipple socket
2 — the Hollow bolt of nipple connection

3 — Nuts of fastening of a cooler of ATF
4 — ATF Cooler

Details of installation of a cooler of ATF (model 463.246)

1 — the Cap nut of the nipple socket
2 — the Hollow bolt of nipple connection
3 — Nuts of fastening of a cooler of ATF

4 — ATF Cooler
5 — the Basic arm

 PERFORMANCE ORDER

  1. Remove protection of a case (except models 463.246).
  2. Merge ATF (see the Head the Current leaving and service).
  3. Release a cap nut (1) of the nipple socket on a cooler (4), - prepare for collecting the spilled liquid.
  4. Turn out a hollow bolt (2) of nipple connection on a cooler (4), - prepare for collecting the spilled liquid.
  5. Release nuts (3) fastenings of the oil cooler (4).
  6. On models 463.266 (G55 AMG) delay from a cooler (4) a basic arm (5).
  7. Remove a cooler (4), - prepare for collecting the spilled liquid.
  8. Installation is made upside-down.