8.8. Removal and installation of the sensor of output turns of AT
Details of installation of the sensor of output turns of AT (1 of 2)
Details of installation of the sensor of output turns of AT (2 of 2)
|
- Take a key from the ignition lock.
- Remove the lever (1) of an otpuskaniye of the lock of a cowl.
- Uncover (2) under the dashboard at the left, - replace the broken clamps.
- Previously having marked, disunite the socket (3).
- Remove a fixing bandage.
- Turn out a bolt (7) of fastening of steering draft.
- Having released a nut (9), weaken a fixing collar (8).
- Turn out a bolt (5) and remove the sensor of output turns of transmission (4), - in case of need prepare replaceable sealing laying. Remove an install label and transfer it to the new sensor.
- Accurately release a sensor electrical wiring from the plug (6) through passage in a motive compartment.
- Installation is made upside-down.
- In conclusion make cleaning of the processor memory of system of onboard self-diagnostics.
|
|