dbba662c

6. A power supply system and production of the fulfilled gases

Specifications

Separate characteristics are provided also in the text of the Head and in case of obligation of their performance are highlighted in bold type.

System of injection of petrol engines

General information, adjusting data

Grades of the applied fuel See Specifications
Volume of the fuel tank See Specifications
Type of system of injection Electronic microprocessor system of the distributed ME-SFI injection
Principle of measurement of a consumption of air Termoanemometrichesky sensor of measurement of mass of air (MAF)
Type of the fuel pump Pierburg D-722156.00
Turns of idling, min.-1
  • M112
600 ÷ 850
  • M113
550 ÷ 800
Contents WITH on single turns, at a temperature of oil of 60 °C (all models) No more than 0.5%, are not subject to adjustment
Contents WITH on 2200-2800 rpm (all models) No more than 0.3%
The maintenance of NANOSECOND on single turns, ppm (particles) (all models) 100
The maintenance of CO2 on single turns (all models) 14.5-16%
The maintenance of O2 on single turns (all models) 0.1-0.5%
Value a lambda on 2200-2800 rpm (all models) 0.97-1.03

System of injection of diesel engines

General information, adjusting data

Grades of the applied fuel See Specifications
Volume of the fuel tank See Specifications
Type of system of injection CDI
Principle of measurement of a consumption of air Termoanemometrichesky sensor of measurement of mass of air (MAF)
Opacity of the fulfilled gases
  • EU limit
No more than 73%
  • Homological value
56%
Installation of phases of gas distribution (for 2-millimeter opening of valves at not a new gas-distributing chain)
  • M612

Inlet valves

    • Opening
19 ° after VMT
    • Closing
7 ° after VMT

Final valves

    • Opening
9 ° before VMT
    • Closing
22 ° before VMT
  • M628

Right head of cylinders

    Inlet valves

      • Opening
18 ° after VMT
      • Closing
6 ° after VMT

Final valves

      • Opening
11 ° before VMT
      • Closing
23 ° before VMT

Left head of cylinders

Inlet valves

      • Opening
18 ° after VMT
      • Closing
6 ° after VMT

Final valves

      • Opening
11 ° before VMT
      • Closing
28 ° before VMT
Turns of idling, min.-1
  • M612
640 ÷ 840
  • M628
510 ÷ 710
The maximum admissible turns (without loading), mines-1
  • M612
4200 ÷ 4600
  • M628
4500 ÷ 4900

Efforts of tightening of threaded connections, Nanometer

Power supply system

Petrol models

Bolts of fastening of the inlet pipeline to a head of cylinders 20
Bolts of fastening of the electronic activator of the drive of a butterfly valve to the inlet pipeline 9
Fastening of the giving fuel pipe to the toplivoraspredelitelny highway 38

Diesel models

M612

Screws of fastening of the finishing panel of a cover of a head of cylinders 10
Screws of fastening of the finishing panel of the air distributor 10
Bolts of the air distributor (M7) 16
Bolts of fastening of a basic arm to the air distributor 20
Bolts of fastening of an electric motor of the drive of shutdown of inlet port to the air distributor 9
Bolts of flange connection of a final collector with a turbocompressor 30
Bolt of fastening of an output oil pipeline to a turbocompressor 9
Carving nozzle of fastening of the line of supply of oil to a turbocompressor 30
Bolt of fastening of the line of supply of oil to a head of cylinders 9
Bolt of fastening of a basic arm to a turbocompressor 30
Bolt of fastening of a basic kronshteynaturbokompressor to an engine case 20
Nuts of fastening of a final collector to a head of cylinders 30
Bolts of fastening of the preliminary fuel pump to the top cover of a head of cylinders 9
Nuts of fastening of the pressure head line to TNVD/of the toplivoraspredelitelny highway 23
Bolts of a basic arm of TNVD 9
Bolts of fastening of TNVD to a head of cylinders 14
Bolts of fastening of the toplivoraspredelitelny highway to a head of cylinders 14
Hollow bolt of nipple connection of the maslodrenazhny line to the toplivoraspredelitelny highway 20
Nuts of fastening of pressure head lines to nozzles / топливораспределительной highways 23
Bolts of fastening of clamps on nozzles
  • Stage 1
7
  • Stage 2
To hold on on a corner 90 °
Fastening of the sensor of pressure to fuel - the distributive highway 20
Bolts of fastening of the valve of management of pressure to the toplivoraspredelitelny highway
  • Stage 1
3
  • Stage 2
5

M628

Bolts of the air distributor (M7) 16
Bolt of fastening of a tube of EGR to EGR cooler 15
Bolts of flange connection of a vypusknogokollektor with a turbocompressor 30
Bolt of fastening of an output oil pipeline to a turbocompressor 9
Carving nozzle of fastening of the line of supply of oil to a turbocompressor 30
Bolt of fastening of the line of supply of oil to a head of cylinders 10
Bolt of fastening of a basic arm to a turbocompressor 30
Nuts of fastening of a final collector to a head of cylinders 30
Bolts of fastening of the preliminary fuel pump to TNVD 9
Nuts of fastening of the pressure head line to TNVD / to valvate assembly 23
Bolts of fastening of TNVD to a head of cylinders 14
Bolts of fastening of the toplivoraspredelitelny highway to a head of cylinders 20
Nuts of fastening of the pressure head line to valvate assembly / топливораспределительной highways 23
Bolts of fastening of clamps on nozzles
  • Stage 1
7
  • Stage 2
To hold on on a corner 90 °
Fastening of the sensor of pressure to valvate assembly 35
Hollow bolt of nipple connection of the maslodrenazhny line to the toplivoraspredelitelny highway 20
Fastening of valvate assembly to the air distributor 12
Bolt of a collar of fastening of the pressure head line to the air distributor 8

Systems of release and decrease in toxicity of the fulfilled gases

Petrol models

Bolts of flange connections of sections (including cross) systems of release 25
Screws of fastening of bypass section to transmission 38
Nuts of a final collector 16
Lambda probes 55
Bolts of fastening of the air pump to a GRM drive cover 12
Bolt of fastening of the EGR valve to a head of cylinders 20
Anchor nut of fastening of a tube of EGR to the EGR valve 40
Bolt of fastening of a tube of EGR to the inlet pipeline 9

Diesel models

M612

Bolt of fastening of a basic arm of the three-functional catalytic converter to an engine case 20
Nuts of a final collector 30

M628

Fastening of a turbocompressor to the forward catalytic converter 15
Nuts of a final collector 30
Bolts of the air distributor (M7) 16
EGR stripper bolt to the top part of the air distributor 15
Bolts of fastening of a cooler of EGR to a positioner 15
Bolt of fastening of the EGR activator to a fitting on a head of cylinders 15