dbba662c

6.4.11. Removal and installation of the sensor of temperature of cooling liquid (CDI)

Diesel models 463.333 (M628)

Details of installation of the sensor of temperature of cooling liquid of a control system of the CDI M628 engine (1 of 2)

1, 5, 5a — Bolts
2 — the Air duct
6 — the Cover
14 — the Left inlet air duct
15 — the Right inlet air duct
16 — the Panel of finishing of the left head of cylinders

17 — the Panel of finishing of the right head of cylinders
B28 — pressure Sensor
N14/2 — the Block of output tension of system of preheat
N14/2x1, N14/2x2 — Sockets of connection of output tension

Details of installation of the sensor of temperature of cooling liquid of a control system of the CDI M628 engine (2 of 2)

7 — the Vacuum line
8 — the Vacuum pump
9 — Lock uvulas
10 — Clamps
11 — the Bolt

12 — the Cable sleeve
13 — the Directing pins
14 — the Fixing collar
B11/4 — the Sensor of temperature of cooling liquid

 PERFORMANCE ORDER

  1. Remove the air cleaner (see the Section Service of Components of an Inlet Air Path).
  2. Remove the right air inlet with the MAF (B2/7) sensor (see the Section Service of Components of an Inlet Air Path).
  3. Release an air duct (15) from clamps in a wheel arch.
  4. Remove the panel of finishing right heads of cylinders (17).
  5. Turn out a bolt (1) and take aside an air duct (2).
  6. Turn out a bolt (5a) and uncover (6).
  7. Disconnect an electrical wiring from the sensor of pressure (B28).
  8. Disunite sockets (N14/2x1 and N14/2x2) on a block of output tension of system of preheat (N14/2).
  9. Having squeezed lock uvulas (9), disconnect the line (7) from the vacuum pump (8).
  10. Release clamps (10) and shift the vacuum line (7) aside.
  11. Turn out a bolt (11).
  12. Remove a cable sleeve (12) from the directing pins (13) and open it for the purpose of ensuring access to the socket of an electrical wiring of the sensor of temperature of cooling liquid (B11/4).
  13. Having wrung out the screw-driver a collar (14), remove the sensor of temperature of cooling liquid (B11/4), - prepare for collecting the spilled liquid.
  14. Installation is made upside-down, - do not forget to replace sealing elements.
  15. In conclusion make cleaning of the processor memory of system of onboard self-diagnostics (see the Head Sistemy of electric equipment of the engine).