dbba662c

6.3.15. Removal and installation of a low-temperature cooler

Model 463.323 (M612)

Details of installation of a low-temperature cooler (463.323)

1 — the Air inlet
2, 3 — Lines of a cooling path
4 — the Overflow hose

5 — the Auxiliary fan
6 — the Low-temperature cooler
7 — the Top cross beam of a front

 PERFORMANCE ORDER

  1. The car also establish to Poddomkratta it on props.
  2. Remove protection of a case.
  3. Empty the cooling system (see the Head the Current leaving and service).
  4. Remove a front grille (see the Head Kuzov).
  5. Remove an air inlet (1).
  6. Remove the top cross beam of a front (7) assembled with a latch of the lock of a cowl and a cable of the drive of its otpuskaniye (see the Head Kuzov).
  7. Disconnect lines of a cooling path (2 and 3) and an overflow hose (4).
  8. Remove auxiliary ventilatory assembly (see the Head of the Cooling system, heating, ventilation and air conditioning).
  9. Having given at first forward, then up, remove assembly of a low-temperature cooler (6).
  10. Installation is made upside-down.
  11. In conclusion make cleaning of the processor memory of system of onboard self-diagnostics (see the Head Sistemy of electric equipment of the engine).

Model 463.333 (M628)

Details of installation of a low-temperature cooler (463.333)

1 — the Front grille
2 — the Low-temperature cooler
3, 4, 5 — Lines of a cooling path

6, 7 — Nuts
8 — Rubber support

 PERFORMANCE ORDER

  1. The car also establish to Poddomkratta it on props.
  2. Remove protection of a case.
  3. Remove a casing of ventilatory assembly.
  4. Empty the cooling system (see the Head the Current leaving and service).
  5. Disconnect hoses of a cooling path (4 and 5) and release the nipple socket of the line (3).
  6. Give nuts (7) and remove assembly of a low-temperature cooler (2).
  7. Installation is made upside-down.
  8. In conclusion check cooling system components for existence of signs of development of leaks.