dbba662c

6.3.11. Removal and installation of the sensor of pressure in the fuel highway

Model 463.323 (M612)

Details of installation of the sensor of pressure in the fuel distributive highway (M612)

21 — the Highway

B4/6 — the fuel pressure Sensor

 PERFORMANCE ORDER

  1. Remove panels of finishing of a cover of a head of cylinders.
  2. Disconnect an electrical wiring and remove the sensor of pressure (B4/6), the second key hold the union on the highway (21).
  3. Installation is made upside-down. In conclusion clear memory of the module of onboard self-diagnostics (see the Head Sistemy of electric equipment of the engine).

Model 463.333 (M628)

Details of installation of the sensor of pressure in the fuel distributive highway (M628)

1 — the Vacuum line
2 — the Basic arm

21/7 — the Valvate block
B4/6 — the fuel pressure Sensor

 PERFORMANCE ORDER

  1. Remove the air cleaner (see the Section Service of Components of an Inlet Air Path).
  2. Release from a basic arm (2) and take aside the vacuum line (1).
  3. Disconnect an electrical wiring and remove the sensor of pressure (B4/6).
  4. Installation is made upside-down. In conclusion clear memory of the module of onboard self-diagnostics (see the Head Sistemy of electric equipment of the engine).