dbba662c

6.2.12. Removal and installation of the fuel tank

Details of installation of the fuel tank (all models) (1 of 4)

1 — the Fuel tank
7 — Assembly tapes
8 — Insulating laying
9, 17 — Sealing rings
10 — the Drain stopper
13 — Arms of fastening of the filter
14 — the Filter

15 — the Fuel pump
16 — Collars of fastening of the fuel pump
18 — the Protective coupling
19 — the Jellied mouth
20 — the Cover
21 — the Connecting branch pipe

Details of installation of the fuel tank (all models) (2 of 4)

12 — the Left ventilating hose

Details of installation of the fuel tank (all models) (3 of 4)

2 — the fuel reserve Sensor
4 — the Soaking-up fuel-supply line
5 — the Ventilating hose
6 — electrical wiring Sockets

Details of installation of the fuel tank (all models) (4 of 4)

11 — the Right ventilating hose


 PERFORMANCE ORDER

  1. On models of the corresponding complete set (ET2 code) activate the service mode of system of an emergency call of TELE AID (see the Section Activation/deactivation of the Service Mode of System of an Emergency Call of TELE AID).
  2. Disconnect a negative wire from the battery.
  3. The car also establish to Poddomkratta it on props.
  4. Empty the fuel tank (see the Section Depletion of the Fuel Tank).
  5. Uncover (20) jellied mouths (19).
  6. Remove the left and right back panels of protection of wheel arches.
  7. Release fixing collars and disconnect a landing branch pipe (21) of a jellied mouth (19) from the fuel tank.
  8. Disconnect from the fuel tank left (12) and the right (11) ventilating hoses, - a zakuporta landing unions.
  9. Disconnect from a tank the line of return of fuel, - a zakuporta the landing union.
  10. Disconnect lines of communication from the fuel reserve sensor (see the Section Removal and installation of the sensor of a reserve of fuel).
  11. Remove the fuel pump (see the Section Removal and installation of the fuel pump).
  12. Release assembly tapes (7) and remove the fuel tank (1).
  13. Installation is made upside-down.
  14. In the conclusion (at the corresponding complete set) deactivate the service mode of the TELE AID system (see the Section Activation/deactivation of the Service Mode of System of an Emergency Call of TELE AID) and make cleaning of the processor memory of system of onboard self-diagnostics (see the Head Sistemy of electric equipment of the engine).