dbba662c

6.2.11. Removal and installation of the fuel distributive highway and injectors

Highway

Details of installation of the fuel distributive highway

1 — the Cover of the power unit with the built-in air cleaner
2 — the Service valve
3 — the Clamp
4 — the Plastic cover

5 — the Fuel highway
6 — the Line of supply of fuel
7 — Bolts
Y62 — the Fuel injector

 PERFORMANCE ORDER

  1. Uncover the power unit with the built-in air cleaner (1) (see the Section Removal and installation of components of an inlet air path).
  2. Otboltite clamp (3).
  3. Remove a plastic cover (4).
  4. Via the service valve dump pressure in a power supply system, - prepare for collecting the forced-out fuel.
  5. Otboltite line of supply of fuel (6).
  6. Turn out fixing bolts (7) and remove the fuel distributive highway (5) assembled with injectors (Y62) from the inlet pipeline.
  7. Installation is made upside-down.

Injectors

Details of installation of fuel injectors

16/7 — the Antirotational clamp
17 — the Fuel highway

Y62 — Fuel injectors
Arrow — the Rectangular nozzle

 PERFORMANCE ORDER

  1. Remove the fuel distributive highway (17).
  2. Take injectors (Y62).
  3. Installation is made upside-down, - in case of need replace sealing rings. Before installation sealing rings should be oiled. Track that antirotational clamps (16/7) were latched on rectangular nozzles (shooter).