dbba662c

5.2.6. Removal and installation of the circulation pulser of a heater

Details of installation of the circulation pulser of a heater



 PERFORMANCE ORDER

  1. Remove protection of a case.
  2. Empty the cooling system (see the Head the Current leaving and service).
  3. Uncover the engine/air cleaner (see the Head of the Power supply system and production of the fulfilled gases).
  4. Remove the right sleeve of an intake of air (1), - on the models equipped with the series 612 engine, disunite the socket on a hose of system of ventilation of a case.
  5. Disunite the socket (2) electrical wirings of the circulation pulser (M13).
  6. Release fixing collars (3) and disconnect hoses (4 and 5).
  7. Remove a loker of protection of an arch of the right forward wheel.
  8. Turn out fixing screws (6) and, having pulled up, remove assembly of the circulation pulser (M13).
  9. Installation is made upside-down.
  10. In conclusion check cooling system components for existence of signs of development of leaks.