dbba662c

5.2.4. Removal and installation of the fan of the heater / conditioner of air and its module of management

Ventilatory assembly

Details of installation of the fan of the heater/conditioner of air

1 — Fixing screws
2 — the Connecting socket of an electrical wiring of the controller of the fan (A32n1)

A32m1 — a fan drive Electric motor
A32n1 — the Electronic module (controller) of management of functioning of the fan

 PERFORMANCE ORDER

  1. Uncover under the dashboard on the right.
  2. Disconnect an electrical wiring from the controller of the fan (A32n1).
  3. Turn out fixing screws (1) and remove the fan (A32m1) assembled with the controller (A32n1).
  4. Installation is made upside-down.

Module of management

Details of installation of the electronic module of management of functioning of the fan of a heater

1 — the electrical wiring Socket
2 — the Casing
3 — Screws
4 — the Connecting socket of an electrical wiring of the driving motor of the fan (A32m1)
A32m1 — a fan drive Electric motor
A32n1 — the fan Controller


 PERFORMANCE ORDER

  1. Remove ventilatory assembly (see above).
  2. Disunite the contact socket (1) and turn out the screw located under it.
  3. Having pulled in the direction specified by shooters, take assembly of an electric motor (A32m1) from a casing (2).
  4. Turn out fixing screws (3) and remove the controller (A32n1).
  5. Disconnect a module electrical wiring from an electric motor (4).
  6. Installation is made upside-down.