dbba662c

5.2.10. Removal and installation of auxiliary ventilatory assembly

On the example of model 463.323 (M612 engine)

Details of installation of auxiliary ventilatory assembly on models 463.323 (1 of 2)

1 — the Top cross beam of a front
2 — the GUR liquid cooling Coil
3 — Bolts

5 — Auxiliary ventilatory assembly
8 — Nuts

Details of installation of auxiliary ventilatory assembly on models 463.323 (2 of 2)

4 — the electrical wiring Socket
6 — the Electrical wiring of auxiliary fans

7 — the Panel of finishing of a wheel arch

 PERFORMANCE ORDER

  1. On models of the corresponding complete set (ET2 code) activate the service mode of system of an emergency call of TELE AID (see the Section Activation/deactivation of the Service Mode of System of an Emergency Call of TELE AID).
  1. Include auxiliary and connect it to the regular battery, then disconnect a negative wire from the battery.

    7 — the Auxiliary accumulator
    8 — the Plug of a positive wire of the module
    9 — the Plug of a negative wire of the module
    W10 — Grounding of the battery
  1. Remove a forward decorative lattice (see the Head Kuzov).
  2. Remove the top forward cross beam of a frame (1) and take her aside assembled with the lock of fixing of a cowl.
  3. Turn out fixing bolts (3) from the coil (2) coolings of GUR liquid.
  4. Remove the panel of finishing (loker) of an arch of the left forward wheel (7).
  5. Disunite the contact socket (4) of auxiliary ventilatory assembly (5), at assembly do not forget to replace bandage tapes.
  6. Push an electrical wiring (6) of auxiliary ventilatory assembly (5) in an opening (shooter) in a loker (7).
  7. Give nuts (8) and, having pulled up and wringing out the coil (2) coolings of GUR aside remove assembly of auxiliary fans (5).
  8. Installation is made upside-down. On models of the corresponding complete set do not forget to deactivate the service mode of the TELE AID system (see the Section see the Section Activation/deactivation of the Service Mode of System of an Emergency Call of TELE AID).
  9. In conclusion make cleaning of the processor memory of system of onboard self-diagnostics (see the Head Sistemy of electric equipment of the engine).