dbba662c

5.1.10. Removal and installation of a low-temperature cooler (M612)

Details of installation of a low-temperature cooler on diesel models with the M612 engine

1 — an air intake Sleeve
2, 3 — Hoses of a cooling path
4 — the Overflow line of a cooling path

5 — Auxiliary fans
6 — the Low-temperature cooler
7 — the Top cross beam of a front

 PERFORMANCE ORDER

  1. The low-temperature cooler is established on the diesel models equipped with the series 612 engine.
  2. The car also establish to Poddomkratta it on props.
  3. Remove protection of a case.
  4. Empty the cooling system (see the Head the Current leaving and service).
  5. Remove a forward decorative lattice (see the Head Kuzov).
  6. Remove a sleeve of an intake of air (1).
  7. Remove the top cross beam of a front (7) and take it aside, without removing the cowl lock.
  8. Disconnect hoses of a cooling path (2 and 3), - in case of need prepare replaceable collars.
  9. Disconnect the overflow line (4) of a cooling path.
  10. Remove assembly of auxiliary fans (5) (see the Section Removal and installation of auxiliary ventilatory assembly).
  11. Having delayed forward, then having given up, remove assembly of a low-temperature cooler (6).
  12. Installation is made upside-down.
  13. In conclusion check the cooling system for existence of signs of development of leaks and clear the processor memory of system of onboard self-diagnostics (see the Head Sistemy of electric equipment of the engine).