- Turn off a cover of the tank of hydraulic liquid of the drive of blocking of differential.
|
a.
b.
|
- By means of the syringe or a rubber pear pump out liquid from the tank.
- Connect to the tank the special device for pumping of a path and connect a pressure head hose.
- Working according to instructions of manufacturers, install in the device for pumping working pressure.
|
- Remove from the gate of pumping (2) on the executive cylinder of the drive of blocking of differential a protective cap, pull a hose which second end lower in drain capacity on the gate.
|
|
- Release the gate and you hold its opened until fresh brake fluid, pure, free from air bubbles, does not begin to follow from a drain hose.
- Tighten the gate, remove a hose and put into place a dustproof cap.
- Disconnect from the tank a pressure head hose and the device for pumping, turn out the connecting socket.
- Add fresh hydraulic liquid in the tank, having brought its level to the mark "maximum", then screw a cover.
|
|