dbba662c

3.13. Check of a condition of system of production of the fulfilled gases

 PERFORMANCE ORDER

  1. Check has to be made at the cold engine therefore it is better to be engaged in it before a trip, the first for the present day, or not earlier than in three hours after switching off of the engine. Check a state twist systems of release, beginning from the engine and finishing with a cut of an exhaust pipe. Ideally this inspection should be carried out at the car lifted on the winch when from below to it there is free access. If the winch is inaccessible, the car and reliably install to a poddomkratta it on support.
  1. Examine pipes and pipe connections on existence of signs of development of leaks, strong corrosion and mechanical damages. Check a state and reliability of fastening of all brackets and suspensions of system.

The suspensions located near the catalytic converter usually are made of heat resisting rubber and differ in red color.

  1. At the same time examine the car bottom on existence of holes, corrosion, the dispersed seams and other defects allowing penetration of the fulfilled gases into interior of the car. Close up all openings suitable sealant.
  2. The system of release, often is a source of a roar and other unpleasant sounds. Shake and pull pipes, mufflers and the catalytic converter. If any of components adjoin to elements of a body or details of a suspension bracket, replace fixture of system of release. In more detail the design of system of production of the fulfilled gases is considered in the Head of the Power supply system and production of the fulfilled gases.
  3. Examine the electrical wiring brought to a lambda probe. In case of need replace established on a reception pipe a lambda probe.
  4. Survey of an internal surface of an exhaust pipe allows to define the current working condition of the engine. The structure of deposits in a pipe speaks about quality of settings of the engine. If the pipe from within black and smoked, can indicate it that it is necessary to check fuel system carefully.