dbba662c

13.7.7. Removal and installation of the transceiver of the Handsfree system of mobile telephone communication

Details of installation of the transceiver of the Handsfree system of mobile telephone communication

1 — the Assembly bracket
And — I Will corrode connections of a fiber-optical cable

In — the electrical wiring Socket
A35 — the Transceiver

The described devices are used on the models equipped with mobile telephone communication on the basis of the devices Nokia 6210 (ET7 complete set code) and 3110 (EV7 code).

 PERFORMANCE ORDER

  1. Turn on the auxiliary accumulator and connect it to the regular battery, then disconnect from the last a negative wire.

    7 — the Auxiliary accumulator
    8 — the Plug of a positive wire of the module
    9 — the Plug of a negative wire of the module
    W10 — Grounding of the battery

  1. Remove assembly of the central console (see the Head Kuzov).
  2. Disconnect from the transceiver (A35) a fiber-optical cable (A), - at once to a zakuporta both wave guides special lightproof caps.
  3. Having squeezed clamps, disunite the transceiver electrical wiring socket(s).
  4. Give fixture (two screws and one nut) and remove from the tunnel of the transmission line an assembly bracket (1).
  5. Turn out two bolts located under a bracket (1) and remove the transceiver (A35).
  6. Installation is made upside-down.
  7. In conclusion make reading of the DTC codes and cleaning of memory of system of onboard self-diagnostics by means of the STAR DIAGNOSIS scanner (6511 1801 00) (see the Head Sistemy of electric equipment of the engine).