dbba662c

13.7.2. Removal and installation of the CD changer / TV tuner

CD changer (EP5 complete set code)

Details of installation of a CD changer on the example of the Station wagon models (1 of 2)

2 — Fixing nuts
A2/6 — a CD changer

A2/42 — the TV tuner

Details of installation of a CD changer on the example of the Station wagon models (2 of 2)

4 — the Socket of a plait of giving of food to a CD changer

5 — the Socket of a fiber-optical cable

 PERFORMANCE ORDER

  1. Take charging shop from a CD changer.
  1. Turn on the auxiliary accumulator and connect it to the regular battery, then disconnect from the last a negative wire.

    7 — the Auxiliary accumulator
    8 — the Plug of a positive wire of the module
    9 — the Plug of a negative wire of the module
    W10 — Grounding of the battery
  1. On models of the corresponding complete set (EM9 code) remove the TV tuner (A2/42) (see below).
  2. Release four fixing nuts (2), disunite sockets (4 and 5) on back the parties of assembly of a CD changer (A2/6) and remove the last.

At once to a zakuporta wave guides of the socket of connection of a fiber-optical cable (5) special lightproof caps.

  1. Installation is made upside-down.
  2. In conclusion make reading of the DTC codes and cleaning of memory of system of onboard self-diagnostics by means of the STAR DIAGNOSIS scanner (6511 1801 00) (see the Head Sistemy of electric equipment of the engine) and perform procedures of basic programming.

TV tuner (EM9 complete set code)

Details of installation of the TV tuner (1 of 2)

And — the cover Equipped with a vetrootboynik

In — the Support of a vetrootboynik

Details of installation of the TV tuner (2 of 2)

1 — the Plastic frame under installation of a CD changer
2 — the Carpet panel
3 — Fixing screws

A2/42 — the TV tuner
X1/27 — the Antenna socket
X1/28 — the electrical wiring Socket

 PERFORMANCE ORDER

  1. On models of the corresponding complete set (ET2 code) activate the service mode of system of an emergency call of TELE AID (see the Section Activation/deactivation of the Service Mode of System of an Emergency Call of TELE AID).
  1. Turn on the auxiliary accumulator and connect it to the regular battery, then disconnect from the last a negative wire.

    7 — the Auxiliary accumulator
    8 — the Plug of a positive wire of the module
    9 — the Plug of a negative wire of the module
    W10 — Grounding of the battery

  1. On models of the corresponding complete set (V57 code) uncover the luggage compartment.
  2. Uncover equipped with a vetrootboynik (And), - on three push-button clamps each party.
  3. Remove the left basic arm (V) of a vetrootboynik.
  4. On models of the corresponding complete set (V53 code) remove the left ware compartment.
  5. On models of the corresponding complete set (EP5 code) remove a plastic frame (1) under installation of a CD changer (see above).
  6. Having slightly raised the panel of side finishing, remove a carpet upholstery (2) arches of the left wheel.
  7. Turn out two fixing screws and remove the adjacent panel of a carpet upholstery of a floor.
  8. Disunite sockets of an antenna cable (X1/27) and electrical wiring (X1/28).
  9. Turn out four fixing screws (3) and remove the TV tuner (A2/42).
  10. Installation is made upside-down, - on models of the corresponding complete set (ET2 code) deactivate the service mode of the TELE AID system (see the Section Activation/deactivation of the Service Mode of System of an Emergency Call of TELE AID).
  11. In conclusion make reading of the DTC codes and cleaning of memory of system of onboard self-diagnostics by means of the STAR DIAGNOSIS scanner (6511 1801 00) (see the Head Sistemy of electric equipment of the engine).