dbba662c

13.5.6. Replacement of lamps of internal lighting

Main saloon lamp

Replacement of a lamp of the main saloon lamp

1 — the Plafond
2 — Selections
3 — Landing uvulas
4 — the Directing grooves

N70 — the Panel of the ceiling console
N70e1 — the Lamp of the main saloon lamp

 PERFORMANCE ORDER

  1. Having hooked the screw-driver through selections (2) and having released landing uvulas (3) from the directing grooves (4), remove a plafond (1) of the main saloon lamp.
  2. Through a pure dry napkin grasp a lamp (N70e1) and release it from contact clips.
  3. Installation is made upside-down, - track correctness of hit of landing uvulas (3) plafonds (1) in (4) console panels (N70) directing grooves.

The forward directed lamps (lamps for reading)

Replacement of lamps of the forward directed lamps

1 — the Boss

N70 — the Panel of the ceiling console

 PERFORMANCE ORDER

  1. On models of the corresponding complete set (ET2 code) activate the service mode of system of an emergency call of TELE AID (see the Section Activation/deactivation of the Service Mode of System of an Emergency Call of TELE AID).
  1. Turn on the auxiliary accumulator and connect it to the regular battery, then disconnect from the last a negative wire.

    7 — the Auxiliary accumulator
    8 — the Plug of a positive wire of the module
    9 — the Plug of a negative wire of the module
    W10 — Grounding of the battery
  1. Remove the panel of the ceiling console (N70) (see the Section Removal and installation of the panel of the ceiling console).
  2. Having turned in the direction specified by shooters, remove a cartridge (1) of the corresponding lamp.
  3. Through a pure dry napkin grasp a lamp and release it from contact clips.
  4. Installation is made upside-down, - at the corresponding complete set (ET2 code) deactivate the service mode of the TELE AID system see the Section Activation/deactivation of the Service Mode of System of an Emergency Call of TELE AID).
  5. In conclusion make reading of the DTC codes and cleaning of memory of system of onboard self-diagnostics by means of the STAR DIAGNOSIS scanner (6511 1801 00) (see the Head Sistemy of electric equipment of the engine) and perform procedures of basic programming.

Back saloon lamps (Station wagon models)

Replacement of a lama of the back saloon lamp

2 — the Socket
3 — the Lamp
E15/8 — the Left back saloon lamp

E15/9 — the Right back saloon lamp

 PERFORMANCE ORDER

  1. Having released clamps, release assembly of the back lamp (E15/8 or E15/9) from the panel of a ceiling upholstery.
  2. Disunite the socket (2) electrical wirings.
  3. Through a pure dry napkin grasp a lamp and release it from contact clips.
  4. Installation is made upside-down.

The back directed lamps (Station wagon models)

Replacement of lamps of the back directed lamps (E11/1 and E11/2)

 PERFORMANCE ORDER

  1. Hooking a long wedge, accurately release the lamp (E11/1 or E11/2) from the panel of a ceiling upholstery, trying not to damage the last.
  2. Through a pure dry napkin grasp a lamp and release it from contact clips.
  3. Installation is made upside-down.

Lamp of illumination of a ware box

Replacement of a lamp (1) of illumination of a ware box

 PERFORMANCE ORDER

  1. Open a cover of a ware box and accurately release a lamp from clamps.
  2. Through a pure dry napkin grasp a lamp and release it from contact clips.
  3. Installation is made upside-down.