dbba662c

13.4.3. Removal and installation of electric motors of the drive of adjustment of front seats

Electric drive of a back and head restraint

Details of installation of electric motors of the drive of adjustment of a back and head restraint of a front seat

1 — the Cover
2 — the Slip
3, 4 — Screws
5 — the Screw-driver
M27/4 — the Motor of the drive of adjustment of a head restraint of the left seat

M28/4 — the Motor of the drive of adjustment of a head restraint of the right seat
M27/5 — the Motor of the drive of adjustment of a back of the left seat
M27/6 — the Motor of the drive of adjustment of a back of the right seat

 PERFORMANCE ORDER

  1. Remove assembly of a front seat (see the Head Kuzov).
  2. Turn out fixing screws and remove a back upholstery of a back.
  3. Remove a head restraint.
  4. Disconnect an electrical wiring from an electric motor of the drive of adjustment of a head restraint (M27/4 or M28/4).
  5. Having shifted to the right, through a bottom of a back remove an electric motor (M27/4 or M28/4).
  6. Turn out fixing screws (3) and remove a decorative slip (2).
  7. On the right side disconnect a cover (1) of a back.
  8. Turn out the screws (4) located on the right, remove an electric motor of the drive of adjustment of a back (M27/5 or M28/5) and disconnect from it an electrical wiring.
  9. Installation is made upside-down.

Pillow electric drive

Details of installation of electric motors of the drive of adjustment of a pillow of a front seat

1 — the Slip
2, 3, 4 — Screws
M27/1 — the Motor of the drive of adjustment of a pillow of the left seat in the longitudinal direction
M28/1 — the Motor of the drive of adjustment of a pillow of the right seat in the longitudinal direction
M27/2 — the Motor of the drive of adjustment of the rear edge of a pillow of the left seat in the vertical direction
M28/2 — the Motor of the drive of adjustment of the rear edge of a pillow of the right seat in the vertical direction

M27/3 — the Motor of the drive of adjustment of a first line of a pillow of the left seat in the vertical direction
M28/3 — the Motor of the drive of adjustment of a first line of a pillow of the right seat in the vertical direction
N32/1 — the control unit of adjustment of provision of a driver's seat Equipped with memory (and a steering column)
N32/2 — the control unit of adjustment of provision of a passenger seat Equipped with memory

 PERFORMANCE ORDER

  1. Remove assembly of a front seat (see the Head Kuzov).
  2. Separate the control unit of adjustment of provision of a seat (N32/1 or N32/2) equipped with memory and disconnect from it an electrical wiring, - prepare replaceable obvyazny bandages.
  3. Turn out screws (2) and remove a driving electric motor (M27/1 or M28/1).
  4. Remove a slip (1), turn out screws (3) and remove an electric motor (M27/2 or M28/2).
  5. For removal of motors (M27/3 or M28/3) turn out screws (4).
  6. Installation is made upside-down.