dbba662c

13.3.2. Group of switches at the left on the dashboard

Switches of the choice of the mode of functioning of lighting fixtures, adjustments of provision of door rear-view mirrors and activation of faroomyvatel are a part of group (see the Section Governing bodies and the equipment of salon).

Details of installation of group of switches at the left on the dashboard

1 — the Left lower section of finishing of the dashboard
2 — Spring clamps

3 — the Screw
S1 — Group of switches at the left on the dashboard

 PERFORMANCE ORDER

  1. On models of the corresponding complete set (ET2 code) activate the service mode of system of an emergency call of TELE AID (see the Section Activation/deactivation of the Service Mode of System of an Emergency Call of TELE AID).
  1. Turn on the auxiliary accumulator and connect it to the regular battery, then disconnect from the last a negative wire.

    7 — the Auxiliary accumulator
    8 — the Plug of a positive wire of the module
    9 — the Plug of a negative wire of the module
    W10 — Grounding of the battery
  1. Remove the left lower section (1) of finishing of the dashboard (see the Head Kuzov).

Need for removal from the panel (1) of the module of management of the electronic switch of ignition (EIS/EZS) is absent.

  1. On models 463.246/249 of the corresponding complete set remove a knee emphasis (see the Head Kuzov).
  2. Turn out a fixing bolt (3), wring out spring clamps (2) in the directions specified by shooters and, hooking a suitable wedge, release assembly of group of switches (S1) of the dashboard.
  3. Installation is made upside-down, - on models of the corresponding complete set (ET2 code) deactivate the service mode of the TELE AID system (see the Section Activation/deactivation of the Service Mode of System of an Emergency Call of TELE AID).
  4. In conclusion make reading of the DTC codes and cleaning of memory of system of onboard self-diagnostics by means of the STAR DIAGNOSIS scanner (6511 1801 00) (see the Head Sistemy of electric equipment of the engine) and enter the required basic settings of the onboard equipment.