dbba662c

12.3.9. Removal and installation of the facing panel of console section of the dashboard

Details of installation of facing of central/console section of the dashboard

1 — the Facing panel
2 — the Fixing plate
3 — the Bolt
A40/3 — the Multipurpose display / module of management of the COMAND system
N22 — the Button of activation automatic To/in

N30/2 — Assembly of switches of blocking of differentials
N72/1 — the Left top group of switches of console section of the dashboard

 PERFORMANCE ORDER

  1. On models of the corresponding complete set (ET2 code) activate the service mode of system of an emergency call of TELE AID (see the Section Activation/deactivation of the Service Mode of System of an Emergency Call of TELE AID).
  2. Transfer the AT selector lever to situation "D".
  3. Disconnect a negative wire from the battery.
  4. Remove assembly of switches of blocking of differentials (N30/2) (see the Head Onboard electric equipment) and, without disconnecting an electrical wiring, put it aside.
  5. Turn out a bolt (3) and remove a fixing plate (2).
  6. Open a forward ashtray and dismantle the facing panel (1) for what at first shift it down, then pull outside.
  7. Disunite the socket (N22) of an electrical wiring of the button of activation To/in and finally remove the panel (1).
  8. Installation is made upside-down, - at the corresponding complete set (ET2 code) deactivate the service mode of the TELE AID system (see the Section Activation/deactivation of the Service Mode of System of an Emergency Call of TELE AID).
  9. In conclusion make reading of the DTC codes and cleaning of memory of system of onboard self-diagnostics by means of the STAR DIAGNOSIS scanner (6511 1801 00) (see the Head Sistemy of electric equipment of the engine) and enter the required basic settings of the onboard equipment.