dbba662c

12.3.7. Removal and installation of a knee emphasis

For models 463.246/249 of the corresponding complete set

Details of installation of a knee emphasis on models 463.246/249 of the corresponding complete set

1 — the Knee emphasis
2 — Fixing nuts
3 — Clamping plates

4 — Fixing bolts
5 — the Assembly bracket

 PERFORMANCE ORDER

  1. Remove the lower finishing section from the driver's party of the dashboard (see the Section Removal and installation of the left lower section of finishing of the dashboard), - need for dismantle the module of the electronic switch of ignition (EIS/EZS) is absent.
  2. Release fixing nuts (2) and remove clamping plates (3).
  3. Turn out bolts (4) and remove a knee emphasis (1).
  4. Installation is made upside-down, - track that the assembly bracket (5) did not jump out of a fixing opening (shooter), and at a vvorachivaniye of fixing bolts (4) material of an emphasis was not deformed (1).