dbba662c

12.3.21. Removal and installation of pillows of seats

Front seats

Details of installation of a pillow of a driver's seat (1 of 2)

1 — the Pillow
2 — the Operating valve
3 — the Pneumatic line
4 — Pins
5 — Collars

X55/3 — the Socket of an electrical wiring of heating of a driver's seat
X55/4 — the Socket of an electrical wiring of heating of a passenger seat
Arrow — the electrical wiring Socket

Details of installation of a pillow of a driver's seat (2 of 2)

6 — Pins

7 — the Binding

 PERFORMANCE ORDER

  1. On models of the corresponding complete set (H10 code) remove a connecting block (X55/3 or X55/4) and disconnect from it the contact socket (shooter). Previously having marked, release both wires of heating of a seat from a socket casing.
  2. Release both arms of the module of management.
  3. On models of the corresponding complete set (SM7 and SM/8 code) remove the control valve (2) and disconnect the pneumatic line 3) of multicircuit adjustment.
  4. Dismantle pins (4).
  5. Having accurately hooked, remove collars (5).
  6. Having pressed a pillow (1) down also release from guides pins (6).
  7. Remove a binding (7), prepare replaceable bandages.
  8. Having given forward, remove a pillow (1).
  9. Installation is made upside-down, - at installation of pins (6) track correctness of an arrangement of springs.

Back seats

Details of installation of a pillow of a back seat (1 of 3)

1 — the Screw of fastening of a cover
2 — the Cover
3 — the Connecting block

4 — Fixing screws
R13/7x1 — the Socket of an electrical wiring of heating of the right seat

Details of installation of a pillow of a back seat (2 of 3)

5 — the Arm
6 — the Fixing screw

7 — a heating Electrical wiring
8 — a seat belt Anchor

Details of installation of a pillow of a back seat (3 of 3)

R13/5x1 — the Socket of an electrical wiring of heating of the left seat

R13/7x1 — the Socket of an electrical wiring of heating of the right seat

 PERFORMANCE ORDER

  1. Remove a back seat (see the Section Removal and installation of assemblies of back seats) and dismantle from it a back (see the Section Removal and installation of seatbacks).
  2. Lay assembly of a seat on a suitable support, a cover up.
  3. On models of the corresponding complete set (H11 code) remove a connecting block (3) of a heating element from a cover (2), turn out screws (4) and disconnect the socket (R13/5x1 or R13/7x1).
  4. Turn out fixing screws and uncover (2).
  5. Turn out screws (6) and remove an arm (5), - on models of the corresponding complete set (H11 code) release a binding, release an electrical wiring (7) from a pillow and remove it together with an arm.
  6. Remove anchor knot/knots (8) of a back belt (it) of safety.
  7. Installation is made upside-down.