dbba662c

12.3.2. Removal and installation of deflectors of air ducts of the dashboard

Central deflectors

Details of installation of deflectors of the central air duct of the dashboard

1 — Panel group of switches of the central section of the dashboard
2 — Bolts

3 — Assembly of deflectors
4 — Clamps

 PERFORMANCE ORDER

  1. On models of the corresponding complete set (ET2 code) activate the service mode of system of an emergency call of TELE AID (see the Section Activation/deactivation of the Service Mode of System of an Emergency Call of TELE AID).
  2. Disconnect a negative wire from the battery.
  3. Remove group of switches of the drive of blocking of differentials (see the Head Onboard electric equipment).
  4. Remove the panel (1) of groups of switches of console section of the dashboard (see the Head Onboard electric equipment). Need for a detachment of an electrical wiring is absent, - will be to provide access to fixing screws (2) only enough.
  5. Turn out screws (2) and remove assembly (3) central deflectors, having extended it with turn from the dashboard up, - try not to damage clamps (4).
  6. Installation is made upside-down, - track correctness of landing snuffled deflectors on the air ducts.
  7. On models of the corresponding complete set (ET2 code) deactivate the service mode of the TELE AID system (see the Section Activation/deactivation of the Service Mode of System of an Emergency Call of TELE AID).
  8. In conclusion make reading of the DTC codes and cleaning of memory of system of onboard self-diagnostics by means of the STAR DIAGNOSIS scanner (6511 1801 00) (see the Head Sistemy of electric equipment of the engine).

Side deflectors

Left side of the dashboard

Details of installation of side deflectors in the left part of the dashboard

2, 5 — Fixing screws
3 — the Deflector

4 — an air duct Sleeve

 PERFORMANCE ORDER

  1. Remove the switch of the modes of functioning of lighting fixtures (see the Head Onboard electric equipment).
  2. Disconnect from a nozzle of deflektorny assembly an air duct (4).
  3. Depending on execution, having accurately released two clamps by means of a long wedge of a suitable form / turn out fixing screws (2) / (2 and 5) and remove the deflector (3), having pulled its top with turn and having released from the dashboard, - prepare replaceable side basic knot.
  4. Installation is made upside-down.

Right side of the dashboard

Details of installation of side deflectors in the right part of the dashboard

1 — the Deflector
6 — the Fixing screw

7 — an air duct Sleeve

 PERFORMANCE ORDER

  1. Remove the lower cover under the dashboard on the right (see the Section Removal and installation of the lower covers of the dashboard).
  2. Remove a ware box (see the Section Removal and installation of a ware box).
  3. Turn out the screw of fastening of the right air duct (7) systems of ventilation/heating of salon.
  4. Separate an air duct (7) from a nozzle of deflektorny assembly (1), - on a sleeve of an air duct the loudspeaker electrical wiring is fixed.
  5. Further act as it should be, similar described above for the left deflector (see above the paragraph 3 subsections the Left side of the dashboard).
  6. Installation is made upside-down.