dbba662c

12.3.19. Removal and installation of assemblies of back seats

Details of installation of assemblies of back seats

1 — Caps
2 — Back bolts
3 — Forward bolts
4 — the Console
5 — the Gas-filled damper
6 — Assembly nippers

X54/23 — the Socket of an electrical wiring of the left seat
X54/24 — the Socket of an electrical wiring of the right seat

 PERFORMANCE ORDER

  1. Remove decorative caps (1).
  2. On models of the corresponding complete set (H11 code) disunite contact sockets (X54/33 and X54/24) of an electrical wiring of heating of seats.
  3. Turn out bolts (2) and by means of special nippers (6) disconnect gas-filled dampers (5), - an emphasis at a detachment has to be in the unloaded state.
  4. Release and turn out forward bolts (3).
  5. Remove a back seat.
  6. In case of need remove the console (4).
  7. Installation is made upside-down.