dbba662c

12.3.17. Removal and installation of panels of a carpet of a floor

Salon

Details of installation of panels of a carpet of a floor of salon (left side) (1 of 2)

1, 2 — Overlays of thresholds
4 — Panels of finishing of the tunnel of the transmission line

5 — the Accelerator pedal

Details of installation of panels of a carpet of a floor of salon (left side) (2 of 2)

3 — the electrical wiring Socket
6 — the Forward carpet panel
7 — the Carpet panel of tunnel section

8 — the Central carpet panel
9 — the Lower side panel of finishing

 PERFORMANCE ORDER

  1. Remove assembly of a front seat (see the Section Removal and installation of assemblies of front seats).
  2. On models 463.246/249 remove the console of the module of management of system of an emergency call (during the work on the passenger party of the car).
  3. Having hooked in several points a suitable wedge, remove overlays of thresholds of a forward and back door (1 and 2).
  4. Disunite the socket (3) electrical wirings under an overlay of a threshold of a forward door.
  5. Turn out three fixing bolts and remove the panel (4) finishings of the tunnel of the transmission line.
  6. During the work on the driver's party of the car remove assembly of the accelerator pedal (5).
  7. Remove assembly of the central console (see the Section Removal and installation of the central console).
  8. Remove panels of finishing of a rack In (see the Section Removal and installation of panels of finishing of body racks).
  9. Remove side panels of finishing of salon (see the Section Removal and installation of panels of finishing of salon).
  10. Remove the forward carpet panel (6) of a covering of a floor.
  11. Remove the carpet panel (7) of a covering of the tunnel of the transmission line.
  12. Remove the central carpet panel (8) which left side is put on two hairpins of a basic arm of the lever of the parking brake (arrow).
  13. Installation is made upside-down.

Luggage compartment

Details of installation of panels of a carpet of half of the luggage compartment

1 — the Slip
2 — the Carpet panel of a covering of a floor
3 — Fixing eyes

4 — the Carpet panel of a wheel arch
5 — the Plastic frame of a CD changer

 PERFORMANCE ORDER

  1. Remove back seats (see the Section Removal and installation of assemblies of back seats).
  2. On the models of the corresponding complete set (E66 code) equipped with the Harman/Kardon audio system remove LF the loudspeaker.
  3. Remove side finishing panels (see the Section Removal and installation of panels of finishing of salon).
  4. Uncover access to a battery compartment.
  5. Remove a fixing slip (1).
  6. Remove the panel (2) carpets of a floor.
  7. Remove fixing eyes (2).
  8. Remove carpet panels of wheel arches (4).

On models of the corresponding complete set (EP5 code) previously dismantle a plastic frame of the CD ченджера (5) from the left wheel arch.

  1. Installation is made upside-down, - do not forget to grease the lower party of panels (2 and 4) in specially provided points with fresh glue.
  2. In conclusion make reading of the DTC codes and cleaning of memory of system of onboard self-diagnostics by means of the STAR DIAGNOSIS scanner (6511 1801 00) (see the Head Sistemy of electric equipment of the engine).