dbba662c

12.3.16. Removal and installation of a ceiling upholstery (Station wagon model)

Details of installation of a ceiling upholstery on the Station wagon models (1 of 5)

1, 2 — Sun-protection peaks
3 — the Bolt
4 — Support
5 — the Holder
6 — the Cover
7 — the Saloon rear-view mirror

8, 9 — Panels of finishing of racks And
B25 — the Microphone of system of the Hands-free device
N70 — the Panel of switches of the ceiling console

Details of installation of a ceiling upholstery on the Station wagon models (2 of 5)

10 — the Handle
11 — Covers

22 — Points of fastening of a luggage grid
23 — the Bolt

Details of installation of a ceiling upholstery on the Station wagon models (3 of 5)

12 — the Support of a saloon rear-view mirror
13, 16 — Screws
14 — the electrical wiring Socket

15 — the Chromeplated slip
19 — the Metal clamp
B38 — the rain Sensor

Details of installation of a ceiling upholstery on the Station wagon models (4 of 5)

17 — Screws
18 — Guides

20 — Fixing screws

Details of installation of a ceiling upholstery on the Station wagon models (5 of 5)

19 — the Metal clamp

21 — the Ceiling upholstery

 PERFORMANCE ORDER

  1. Completely open the top hatch.
  2. On models of the corresponding complete set (ET2 code) activate the service mode of system of an emergency call of TELE AID (see the Section Activation/deactivation of the Service Mode of System of an Emergency Call of TELE AID).
  3. Remove the left front seat assembled with a frame (see the Section Removal and installation of assemblies of front seats).
  1. Turn on the auxiliary accumulator and connect it to the regular battery, then disconnect from the last a negative wire.

    7 — the Auxiliary accumulator
    8 — the Plug of a positive wire of the module
    9 — the Plug of a negative wire of the module
    W10 — Grounding of the battery

  1. Develop in the parties, turn out screws (3) from basic arms (4), at the corresponding complete set disunite the socket of an electrical wiring and remove sun-protection peaks (1 and 2).
  2. Turn out the fixing screws located under decorative covers (6) and remove holders (5) sun-protection peaks (1 and 2).
  3. Remove the panel of switches (N70) of the ceiling console (see the Head Onboard electric equipment).
  4. Remove a saloon rear-view mirror (7) (see the Section Removal and installation of a saloon rear-view mirror).
  5. On models of the corresponding complete set accurately hook and release the microphone (B25) of the Hands-free/Linguatronic device from a ceiling upholstery (21), disconnect microphone t an electrical wiring.
  6. Remove assembly of the left back seat with a back (see the Section Removal and installation of assemblies of front seats).
  7. Remove panels (8 and 9) of finishing of racks And (see the Section Removal and installation of panels of finishing of body racks).
  8. Remove panels of finishing of racks In (see the Section Removal and installation of panels of finishing of body racks).
  9. Remove side panels of finishing of salon (see the Section Removal and installation of panels of finishing of salon).
  10. Remove back saloon lamps (see the Head Onboard electric equipment).
  11. Remove the back top panel of finishing (see the Section Removal and installation of panels of finishing of salon).
  12. Turn out the fixing bolts located under covers (11) and remove the top handles (10).
  13. At the corresponding complete set turn out fixing screws (23) and remove knots of fastening of a luggage grid (22).
  14. Remove the directed back lamps (see the Head Onboard electric equipment).
  15. Turn out bolts (13), disunite the socket (14) of the sensor of a rain (B38) and remove a basic arm (12) of a saloon rear-view mirror.
  16. Remove an upholstery of a cover of the top hatch (see the Section Removal and installation of the panel of an upholstery of a cover of the top hatch).
  17. Turn out six screws (16) and remove the chromeplated overlay (15) of a frame of the top hatch.
  18. Turn out bolts (17) both guides (18) top hatches.
  19. Accurately separate an upholstery (21) from the ceiling panel in gluing points around an aperture of the top hatch.
  20. Release metal clamps (19) and release an upholstery (21) from a hatch aperture.
  21. Turn out bolts (20) of fastening of a ceiling upholstery (21).
  22. Separate an upholstery (21) from Velkro (shooters') clamps and, having shifted on diagonal back, take from the car.
  23. Installation is made upside-down, - track correctness of hit of an electrical wiring (3) sensors in selection (4).
  24. In conclusion make reading of the DTC codes and cleaning of memory of system of onboard self-diagnostics by means of the STAR DIAGNOSIS scanner (6511 1801 00) (see the Head Sistemy of electric equipment of the engine).