dbba662c

12.3.15. Removal and installation of panels of finishing of salon

Cabriolet models

Panels of finishing of side windows

Details of installation of the panel of finishing of side glass on the Cabriolet models

1 — the Fixing loop
2 — Bolts
3 — the Support of a vetrootboynik
4 — Screws

5 — the Protector
6 — the Finishing panel
7 — Clamps

 PERFORMANCE ORDER

  1. Open folding top.
  2. Remove side glass (see the Section Removal and installation of elements of a glazing of a body).
  3. Turn out screws (2) and remove a fixing loop (1).
  4. Turn out screws (4) and remove a support of a vetrootboynik (3).
  5. Remove a protector (5).
  6. Release two clamps (7) and remove the finishing panel (6).
  7. Installation is made upside-down.

Side panels

Details of installation of side panels of finishing of salon on the Cabriolet models (1 of 3)

And — the Screw of the lower anchor of a seat belt

In — Nizhny Novgorod a seat belt anchor

Details of installation of side panels of finishing of salon on the Cabriolet models (2 of 3)

1 — the Protector
2 — the Lower side panel of finishing
3 — the Top side panel of finishing
4, shooters — Clamps
5 — Rivets

6 — the Nut
7 — the Bearing frame of folding top
8 — Screws
9 — Support of a vetrootboynik

Details of installation of side panels of finishing of salon on the Cabriolet models (3 of 3)

E18/2 — the Left lamp of lighting of the luggage compartment

E18/3 — the Right lamp of lighting of the luggage compartment

 PERFORMANCE ORDER

  1. Remove panels of finishing of a side window (see above).
  2. Remove a protector (1) around a rack of Century.
  3. Release three clamps (4) and separate the lower side finishing panel (2) from top (3).
  4. Remove a facing slip and turn out a bolt (A) of the lower anchor (V) of a seat belt.
  5. Release a clamp (4) and, having given up, remove the lower side finishing panel (2).
  6. Remove a rivet (5).
  7. Uncover the luggage compartment with a vetrootboynik.
  8. Give a nut (6) of folding top.
  9. Remove decorative slips and turn out screws (8) for the purpose of weakening of a frame (7) on the window shelf.
  10. Remove support (9) of a vetrootboynik (on three from each party).
  11. Disconnect an electrical wiring from a lamp of lighting of the luggage compartment (E18/2 or E18/3).
  12. Release clamps (shooters) and release the top finishing panel (3).
  13. On models of the corresponding complete set (E08 code) disconnect an electrical wiring from a loudspeaker.
  14. On models of the corresponding complete set (H11 code) disconnect an electrical wiring of heating of a back seat.
  15. Having given up, remove the panel (3).
  16. Installation is made upside-down.

Station wagon models

Side panels

Details of installation of side panels of finishing of salon on the Station wagon models

1 — the Protector
2 — the Panel of finishing of a back rack
3 — the Door sealant
4 — the Side finishing panel
5 — the Rubber window frame

6 — Clamps
7 — the Directing bracket of the top anchor of a seat belt
8 — Nizhny Novgorod a seat belt anchor

 PERFORMANCE ORDER

  1. Separate from the finishing panel (2) a protector (1).
  2. Remove the finishing panel (2) (see the Section Removal and installation of panels of finishing of body racks), - do not forget to disunite the loudspeaker electrical wiring socket.
  3. Release a rubber sealant (3) around installation of the side finishing panel (4).
  4. Turn out bolts of anchor knots (7 and 8) of a seat belt.
  5. Remove the side finishing panel (4).
  6. Installation is made upside-down, - track correctness of landing of bottom edge of the panel (arrow).

Top back panel

Details of installation of the top back panel of finishing on the Station wagon models

1, 2 — Protectors
3 — the Panel of finishing of a back rack
4 — the Top back finishing panel

5 — Screws
6 — the Cover
7 — Proushina

 PERFORMANCE ORDER

  1. Remove panels of finishing of back racks (3) (see the Section Removal and installation of panels of finishing of body racks).
  2. Remove back saloon lamps (see the Head Onboard electric equipment).
  3. On models of the corresponding complete set (SD0 code) turn out the screw located under a decorative cover (6) and remove the top eye of fixing of a children's seat of ISOFIX.
  4. Turn out screws (5) and dismantle the back top finishing panel (4), having accurately removed it from the directing support of a ceiling upholstery.
  5. Installation is made upside-down.
  6. In conclusion make sure of serviceability of functioning of saloon lamps and (at the corresponding complete set) the BA signaling device.