dbba662c

12.3.10. Removal and installation of the central console

Model 463.250/323/333

Details of installation of the central console on models 463.250/323/333 (1 of 5)

1 — the Cover of the assembly block of safety locks

10 — the Central console

Details of installation of the central console on models 463.250/323/333 (2 of 5)

85 — the Facing frame
86 — the Wooden panel
87 — Bolts
S4/3 — the Switch of additional system of heating (only diesel models)

S46/10 — the Switch of system of heating/ventilation of salon of independent action (at the corresponding complete set)
S97/5 — the Switch of the transfer case

Details of installation of the central console on models 463.250/323/333 (3 of 5)

8, 11 — Bolts

Details of installation of the central console (all models) (4 of 5)

5 — Console deflectors
6 — the Cover

14 — Clamps
And — Chashkoderzhatel

Details of installation of the central console (all models) (5 of 5)

6 — the Cover
7 — power supply Socket

9 — the Telephone socket

 PERFORMANCE ORDER

  1. Turn out the bolt located below and uncover the assembly block of safety locks (1).
  2. Turn out side bolts (shooters) of fastening of the central console (10), - for the purpose of ensuring access to bolts shift front seats in a comfortable position.
  3. On models of the corresponding complete set (ET2 code) activate the service mode of system of an emergency call of TELE AID (see the Section Activation/deactivation of the Service Mode of System of an Emergency Call of TELE AID).
  4. Take a key from the ignition lock.
  1. Turn on the auxiliary accumulator and connect it to the regular battery, then disconnect from the last a negative wire.

    7 — the Auxiliary accumulator
    8 — the Plug of a positive wire of the module
    9 — the Plug of a negative wire of the module
    W10 — Grounding of the battery
  1. Uncover facing a frame (85) of the AT selector lever basis.
  2. Turn out the fixing bolts (87) located in a console ware box.
  3. Accurately release the forward wooden panel (86) from console assembly (10).
  4. Disconnect an electrical wiring from console switches (S4/3, S46/10 and S97/5).
  5. Turn out fixing bolts (8).
  6. Uncover the lever of raising of the parking brake.
  7. Accurately release clamps (14) and remove assembly (5) back console deflectors of systems of heating/ventilation of salon.
  8. Remove a chashkoderzhatel (And).
  9. Release four clamps (two above and two below) and uncover (6).
  10. Disconnect an electrical wiring from the socket of power supply (7).
  11. Disunite the telephone socket (9).
  12. Turn out bolts (11).
  13. Cock the parking brake.
  14. Remove assembly of the central console (10), having given it back and up.
  15. Installation is made upside-down, - at the corresponding complete set (ET2 code) deactivate the service mode of the TELE AID system (see the Section Activation/deactivation of the Service Mode of System of an Emergency Call of TELE AID).
  16. In conclusion make reading of the DTC codes and cleaning of memory of system of onboard self-diagnostics by means of the STAR DIAGNOSIS scanner (6511 1801 00) (see the Head Sistemy of electric equipment of the engine).

Model 463.246/249

The corresponding illustrative material is presented on сопр. an illustration and illustrations of the Detail of installation of the central console on models 463.250/323/333 (2 of 5) and Details of installation of the central console on models 463.250/323/333 (3 of 5) to which all references which are found in the text belong.

Details of installation of the central console on models 463.246/249 (see also illustrations of the Detail of installation of the central console (all models) (4 of 5) and Details of installation of the central console (all models) (5 of 5))

1 — the Slip
2 — Clamps
3 — the Cover of the lever of the parking brake
5 — Console deflectors
6, 8 — Covers
7 — power supply Socket
9 — the Socket

10 — Console assembly
11 — the Telephone socket
12 — the Antenna cable
13 — the Clamp
S97/5 — the Switch of the transfer case

 PERFORMANCE ORDER

  1. Take a key from the ignition lock.
  1. Turn on the auxiliary accumulator and connect it to the regular battery, then disconnect from the last a negative wire.

    7 — the Auxiliary accumulator
    8 — the Plug of a positive wire of the module
    9 — the Plug of a negative wire of the module
    W10 — Grounding of the battery

  1. Uncover (3) levers of raising of the parking brake.
  2. Remove a chashkoderzhatel (And).
  3. Accurately release clamps (14) and remove assembly (5) back console deflectors of systems of heating/ventilation of salon.
  4. Release four clamps (two above and two below) and uncover (6).
  5. Disconnect an electrical wiring from the socket of power supply (7).
  6. In a console ware box uncover (8) and disunite the socket (9).
  7. Release sockets (9 and 11), and also an antenna cable (12) from console assembly, previously having released a clamp (13).
  8. Turn out fourteen fixing screws and remove assembly of the central console (10).
  9. Installation is made upside-down.
  10. In conclusion make reading of the DTC codes and cleaning of memory of system of onboard self-diagnostics by means of the STAR DIAGNOSIS scanner (6511 1801 00) (see the Head Sistemy of electric equipment of the engine).