dbba662c

12.2.5. Removal and installation of a driving cable of an otpuskaniye of a latch of the lock of a cowl

Details of installation of a cable of the drive of an otpuskaniye of a latch of the lock of a cowl (1 of 2)

1 — the latch otpuskaniye Lever
2 — the Bolt

3 — the Driving cable

Details of installation of a cable of the drive of an otpuskaniye of a latch of the lock of a cowl (2 of 2)


 PERFORMANCE ORDER

  1. Open a cowl and remove assembly of its lock (see the Section Removal and installation of the lock of a cowl).
  2. Find a driving cable (3) on a wing mudguard.
  3. Uncover under the dashboard at the left (see the Section Removal and installation of the lower covers of the dashboard), - do not disunite the electric socket.
  4. In interior of the car turn out the screw (2) and remove the lever (1) of an otpuskaniye of a latch of the lock of a cowl, having pulled it back, at the same time wringing out down.
  5. Having pulled back, involve a cable (3) assembled with the lever (1) in salon, - previously grease the rubber plug through passage in a partition of a motive compartment.
  6. Disconnect a cable (3) from the lever (1).
  7. Installation is made upside-down, - the damaged plug through passage in a partition has to be replaced.