dbba662c

12.2.29. Removal and installation of a cable of the drive of the top hatch

Details installation of a cable of the drive of a cover of the top hatch (1 of 2)

1 — the Directing plate
2 — the Sliding holder

3 — the Directing tube

Details installation of a cable of the drive of a cover of the top hatch (2 of 2)

4 — the Directing element

5 — the Driving cable

 PERFORMANCE ORDER

  1. Remove a hatch cover upholstery (see the Section Removal and installation of the panel of an upholstery of a cover of the top hatch).
  2. Otboltite the directing plate (1) and, having pulled forward, release a cable from the directing tube (3).
  3. Press the button of the transfer of the hatch to the cast-away situation and wait until the cable (5) leaves a reducer, - in case of need resort to an emergency method of the drive of the hatch (see the Section Governing bodies and the equipment of salon). If it is not possible to release a cable, it is necessary to disassemble the driving mechanism and to pick up the directing phone (3).
  4. Before installation grease the end of a new cable with suitable lubricant (001 981 14 51). Track completeness of gas station of a cable in the directing tube (3), - the directing plate (4) has to enter a tube opening.
  5. Ask for the help experts HUNDRED Mercedes-Benzs for implementation of the procedure of basic adjustment of a driving cable.
  6. Installation of the remained components is made as it should be, the return to an order of their dismantle.