dbba662c

12.2.23. Removal and installation of an internal upholstery of door assemblies

Forward doors

On the example of a driver's door

Details of installation of the panel of an internal upholstery of a forward door (1 of 2)

1 — Obivochnaya the panel
2 — Caps
3 — the Handle
4 — the Internal handle of a door
5 — the Pocket

6, 7 — Fixing screws
8 — the Finishing panel
9 — Bolts
10 — the Directing felt insert

Details of installation of the panel of an internal upholstery of a forward door (2 of 2)

10 — Sockets
11 — Clamps
S21/1 — Group of switches of management of window regulators on a driver's door

S91 — Group of switches of the electric drive of a seat (with memory of installations)

 PERFORMANCE ORDER

  1. Remove the internal handle of a door (see the Section Removal and installation of internal door handles).
  2. 3 On models 463.246/249 unscrew the lock handle (A).
  3. Remove caps (2) and turn out screws (7) of fastening of the door handle (3).
  4. By means of a suitable wedge separate the obivochny panel (1) from a doorframe in the locations of clamps (8), estimate a condition of the released clamps, replace the broken elements.
  5. Disunite electric sockets (10) groups of switches of management of functioning of electric drives of window regulators (S21/1) and a seat (S91).
  6. Estimate a condition of an insulating film slip, in case of need replace the last.

Back doors

On the example of models with wheel base of 2850 mm

Details of installation of the panel of an internal upholstery of a back door (1 of 3)

1 — Obivochnaya the panel
2 — Caps
3 — the Handle

4 — the Internal handle of a door
5 — Fixing screws

Details of installation of the panel of an internal upholstery of a back door (2 of 3)

6 — Clamps
8 — the Socket
S21/3 — Group of switches of management of a window regulator of the left door

S21/4 — Group of switches of management of a window regulator of the right door

Details of installation of the panel of an internal upholstery of a back door (3 of 3)

And — the Binding
N69/3 — the Module of management of the left door

N69/4 — the Module of management of the right door

The order of implementation of the procedure is similar described above for forward doors. Do not forget to record an electrical wiring of the module of management (N69/3 or N69/4) of a binding at assembly (And).

Back door

Details of installation of panels of an upholstery of a door of a back

1, 8 — Screws
2 — the Handle
3 — the Cover
4 — the Lower section of the obivochny panel

5 — the Button of the uniform lock
6 — the Top section of the obivochny panel
7 — Panels of finishing of a window

Scheme of an arrangement of clamps of fastening of the obivochny panel


 PERFORMANCE ORDER

  1. On models of the corresponding complete set turn out screws (1) of fastening of the lower section (4) of the obivochny panel.
  2. Dismantle caps and turn out screws (8) of fastening of the door handle (2).
  3. Having slightly wrung out an upholstery in the direction of the lock, uncover (3) internal handles of a door.
  4. Hooking a wedge in the locations of clamps (arrow), separate the obivochny panel (4) from a doorframe, drown the button (5) of the uniform lock, then give the panel up and finally remove.
  5. Release the central clamps of fastening of the top section (6) of the obivochny panel.
  6. Unscrew the left and right finishing panels of a window (7).
  7. Estimate a condition of an insulating film slip, in case of need replace the last.
  8. Installation is made upside-down, - the clamps damaged during an otpuskaniye are subject to replacement without fail.