dbba662c

12.2.21. Removal and installation of door locks

Forward doors

Details of installation of the lock of a forward door (1 of 4)

1 — the Cover

Details of installation of the lock of a forward door (2 of 4)

2 — Driving draft
3 — Draft of the internal handle

4 — Draft of the uniform lock

Details of installation of the lock of a forward door (3 of 4)

5 — Bolts

M14/6 — the Activator of the uniform lock (the left door)

Details of installation of the lock of a forward door (4 of 4)

7 — Fixing screws

8 — Castle assembly

 PERFORMANCE ORDER

  1. Remove an internal upholstery and an insulating film of a door (see the Section Removal and installation of an internal upholstery of door assemblies), - the damaged film should be replaced.
  2. Remove a window frame (see the Section Removal and installation of window frames of door assemblies).
  3. Uncover (1) castle assembly.
  4. Release a fastening clamp to the lock (8) of draft (3) of the internal handle and disconnect draft, - in case of need prepare a replaceable clamp.
  5. Disconnect from the lock (8) of draft (2 and 4), - the damaged clamps are also subject to replacement.
  6. Turn out fixing bolts (5) and remove the activator of the uniform lock (M14/6).
  7. Remove the external handle of a door (see the Section Removal and installation of external door handles).
  8. Turn out screws (7) and remove castle assembly (8).
  9. Installation is made upside-down.

Back doors

Details of installation of the lock of a back door (1 of 4)

1 — the Cover

Details of installation of the lock of a back door (2 of 4)

2 — Driving draft
3 — Draft of the internal handle

4 — Draft of the uniform lock

Details of installation of the lock of a back door (3 of 4)

5 — Bolts
M14/8 — the Activator of the uniform lock (the left door)

M14/9 — the Activator of the uniform lock (the right door)

Details of installation of the lock of a back door (4 of 4)

7 — Fixing screws

8 — Castle assembly

The order of implementation of the procedure is similar described above for a forward door.

On models of the second option of execution do not forget to check a condition of a safety lock (5), - in case of need make its replacement.

Back door

Details of installation of the lock of a door of a back (1 of 3)

1 — Screws

Details of installation of the lock of a door of a back (2 of 3)

2 — Castle assembly

Details of installation of the lock of a door of a back (3 of 3)

2 — Castle assembly
3 — Draft of the uniform lock
4 — the Clamp

5 — the Safety lock
6 — Draft of the internal handle

 PERFORMANCE ORDER

  1. Remove an internal upholstery (see the Section Removal and installation of an internal upholstery of door assemblies).
  2. Remove the external handle (see the Section Removal and installation of external door handles).
  3. Remove the internal handle (see the Section Removal and installation of internal door handles).
  4. Remove the lock activator (see the Head Onboard electric equipment).
  5. Turn out fixing screws (1) and remove castle assembly (2).
  6. Disconnect draft (3) activators of the uniform lock.
  7. Remove a clamp (4) and disconnect draft (6) of the internal handle.
  8. Installation is made upside-down. Do not forget to check a condition of a safety lock (5), in case of need make its replacement.

Folding board

Details of installation of the lock of a folding board (1 of 3)

1 — the Plastic tray
2 — the Plastic rivet

3 — the Expansion pin

Details of installation of the lock of a folding board (2 of 3)

4 — the Clamp
5 — Draft of the drive of the activator
6, 14 — Levers
13 — Draft of the drive of a latch of the right lock

15 — the Fixing nut
M14/6 — the Activator of the uniform lock

Details of installation of the lock of a folding board (3 of 3)

7 — the Returnable spring
8 — Draft of the drive of a latch of the left lock
9 — the Latch of the left lock

10 — a draft Clamp
11 — the Carving plate
12 — Screws of fastening of a latch

 PERFORMANCE ORDER

  1. Open a back cover and a toolbox in a folding board.
  2. Dismantle rivets (2 and 3) and take a plastic insert (1).
  3. Remove a clamp (4) of driving draft (5) and disconnect the last from the lever (6)/activator (M14/7).
  4. Turn out screws (12) and remove a carving plate (11). Having pulled in the direction of an arrow, release a latch (9) of the left lock from a door. Release a clamp (10) and finally remove a latch (9).
  5. Release a clamp and separate draft (13) from the lever (14).
  6. Give fixing nuts (15) and, having given down, remove castle assembly assembled with a latch (8) and a sealing element.
  7. Installation is made upside-down, - track correctness of landing of laying.