dbba662c

12.2.20. Removal and installation of internal door handles

Forward doors

Details of installation of the internal handle of a forward door

1 — the Cap
2 — the Bolt

9 — the Driving cable (Bowden)

 PERFORMANCE ORDER

  1. Remove a cap (1), turn out a bolt (2), release clamps, disconnect a driving cable (9) and remove the handle.
  2. Installation is made upside-down.

Back doors

Details of installation of the internal handle of a back door

1 — the Cap
2 — the Bolt

9 — the Driving cable

The order of implementation of the procedure is similar described above for a forward door.

Back door

Details of installation of the internal handle of a door of a back

1 — the Built-in driving mechanism
2 — the Blocking spring

3, 4 — Stoppers

 PERFORMANCE ORDER

  1. Remove an internal upholstery of a door (see the Section Removal and installation of an internal upholstery of door assemblies).
  2. Carefully squeeze and shift the driving mechanism (1) which is built in door assembly to loopy edge of a door.
  3. Release the mechanism (1) so that access to a blocking spring opened (2).
  4. Wring out a spring (2) from a lock uvula (3), having left it hooked for a uvula (4).
  5. Disconnect driving draft.
  6. Installation is made upside-down.