dbba662c

12.2.19. Removal and installation of external door handles

Forward doors

Details of installation of the external handle of a forward door

1 — the Insulating film
2, 3 — Bolts
4 — the Handle

5, 6 — Sealing elements
And — the Control size

 PERFORMANCE ORDER

  1. Turn out a bolt (3) fastenings of the handle (4) to castle assembly.
  2. Remove an internal upholstery and film insulating covering (1) (see the Section Removal and installation of an internal upholstery of door assemblies), - the damaged film should be replaced.
  3. Turn out a fixing bolt (2) and remove the door handle (4), - in case of need prepare replaceable sealing elements (5 and 6).
  4. Installation is made upside-down, - previously adjust the size (A) between the contact surface of the handle and an executive bolt of the door lock.

Back doors

Details of installation of the external handle of a back door

1, 2 — Bolts
3 — the Handle

4, 5 — Sealing elements
And — the Control size

 PERFORMANCE ORDER

  1. Remove the panel of an internal upholstery (see the Section Removal and installation of an internal upholstery of door assemblies).
  2. Turn out bolts (1 and 2) and remove the handle.
  3. Installation is made upside-down, - do not forget to adjust the control size (A) (see above paragraph 4).

Back door

The order of implementation of the procedure is similar described above for a back door.