dbba662c

12.2.16. Removal and installation of forward wings

In total самоконтрящийся fixture are subject to replacement without fail!

Details of installation of a forward wing (1 of 3)

1 — Loker
2 — an air inlet Lattice
3, 8, 11 — Bolts

4 — the Drainage hose
5, 6, 7, 9 — Air inlets
13 — the Cover

Details of installation of a forward wing (2 of 3)

10 — Screws
13 — the Cover
14, 16, 17, 18 — Bolts

15 — the Top cross beam of a front
A2/23 — the GPS Antenna

Details of installation of a forward wing (3 of 3)

12 — Nuts


 PERFORMANCE ORDER

  1. Open a cowl and transfer it to vertical position (see the Section Removal and installation of a cowl).
  2. Remove a forward lattice (see the Section Removal and installation of a forward lattice).
  3. Remove assembly of a block headlight (see the Head Onboard electric equipment).
  4. Remove a loker of protection of a wheel arch (1).
  5. Remove a vacuum receiver of the drive of blocking of differentials (the left wing).
  6. On models 463.323 remove the tank of liquid of washing of glasses (the left wing).
  7. Turn out bolts (3) and remove a lattice of an air inlet (2) (on models 463.323 only on the right wing).
  8. Remove a drainage hose (4).
  9. Turn out bolts (8) and remove air inlets (5 and 6) (on models 463.3223 only on the right wing).
  10. Turn out screws (10) and remove from a wing an air inlet (9) (on models 463.3223 only on the right wing).
  11. Release a bolt (11) of fastening of an air duct to a wheel arch (on models 463.3223 only on the right wing).
  12. Remove the index of turn (see the Head Onboard electric equipment), - on models 463.246 (AMG) in addition disunite the socket of an electrical wiring (E6/3 or E6/4) of the corresponding marker light.
  13. On models of the corresponding complete set (EF4 and ET4 codes) remove the antenna of the GPS (A2/23) navigation system, - only on the left wing.
  14. Remove protection of a case.
  15. At the corresponding complete set remove a boot of a motive compartment (see the Section Removal and installation of a boot of a motive compartment of a complete set of AMG).
  16. Turn out bolts (14) and uncover (13).
  17. Remove the top cross beam of a front (15).
  18. Remove a broad tank of the cooling system (see the Head of the Cooling system, heating, ventilation and air conditioning), - only the right wing.
  19. Remove the rezonatorny camera with a catchment basin (see the Head of the Power supply system and production of the fulfilled gases), - only the right wing.
  20. On models 463.250 remove an antenna divider (only right wing) and, without disconnecting an antenna cable, take him aside.
  21. Remove the tank of liquid of washing of glasses (except models 463.323), - only the right wing.
  22. On models 463.246 (AMG) release, but do not disconnect the line of the hydroproofreader of headlights.
  23. Release eight top (16) and four lobbies (17) bolts of fastening of a wing.
  24. Turn out bolts (18) of fastening of an overlay of an arch.
  25. Give nuts (12) of fastening of a wing to a partition of a motive compartment.
  26. Having given forward, remove a wing, - use the help of the assistant.
  27. Installation is made upside-down.