dbba662c

12.2.10. Removal and installation of bumpers

Front bumper

Details of installation of a front bumper

1 — Bolts
2 — the Bumper
4 — ATF Cooler

B14x1 — the Socket of the sensor of temperature of external air

 PERFORMANCE ORDER

  1. On models of the corresponding complete set (463.246) remove the lower boot of a motive compartment (see the Section Removal and installation of a boot of a motive compartment of a complete set of AMG).
  2. By means of the assistant remove protection of a case.
  3. Remove a fog light (see the Head Onboard electric equipment).
  4. Remove from a bumper (2) a cooler of ATF (4) (except the AMG models).
  5. On models 463.246 (AMG) remove a cooler of motive oil from a bumper (2) and, without disconnecting the line, shift it aside.
  6. Turn out bolts (1).
  7. Disunite the socket (B14x1) of an electrical wiring of the sensor of temperature of external air.
  8. By means of the assistant remove a bumper (2).
  9. Installation is made upside-down.

Rear bumper

Preparation for removal of a rear bumper (1 of 3) (except models 463.246)

And — the Cover of the luggage compartment with a vetrootboynik

In — Assembly brackets of a vetrootboynik

Preparation for removal of a rear bumper (2 of 3)

1 — a CD changer Cover
2 — the Fixing eye

3 — a floor Covering
4 — the Cover

Preparation for removal of a rear bumper (3 of 3)

5 — the electrical wiring Socket
6 — the Pribolchenny socket

7 — Rubber plugs through passage

Details of installation of a rear bumper

8 — Bryzgootboynik
9 — Angular slips
10, 13 — Screws
11 — the Rack
12 — the Socket

E7 — backing Fire
E3/1 — Back
E19/1 — the Left lamp of illumination of registration plate
E19/2 — the Right lamp of illumination of registration plate

 PERFORMANCE ORDER

  1. On models of the corresponding complete set (ET2 code) activate the service mode of system of an emergency call of TELE AID (see the Section Activation/deactivation of the Service Mode of System of an Emergency Call of TELE AID).
  2. Take 3 push-button clamps from each party and uncover (And) with a vetrootboynik (except models 463.246).
  3. On the left side remove assembly brackets (V) of a vetrootboynik (except models 463.246).
  4. On models of the corresponding complete set (V53 code) remove a ware compartment with a cover in the luggage compartment (see the Section Removal, installation and adjustment of doors).
  5. On models of the corresponding complete set (EP5 code) uncover (1) CD changer.
  6. Turn out a fixing eye (2).
  7. Slightly raise edge of the side finishing panel and remove from a cover (4) the carpet panel (3) coverings of a floor.
  8. Turn out two fixing screws and uncover (4).
  9. On models of the corresponding complete set (EP5 code) remove a CD changer.
  10. Disunite the socket (5) of the electrical wiring plait car going from a rear bumper to salon.
  11. On models of the corresponding complete set (ET2 code) disunite the carving socket (6) of the replacing antenna of system of an emergency call of TELE AID.
  12. Release an electrical wiring from the body panel, having extended it outside through plugs (7) through passage.

The damaged plugs (7) are subject to replacement without fail.

  1. Remove a bryzgootboynik (8).
  2. Turn out screws (10), disconnect from racks (11) and remove angular overlays (9) of a bumper.
  3. On the right disunite the socket (12) of fire of a backing (E7).
  4. At the left disconnect an electrical wiring from a back foggy lamp (E3/1).
  5. Remove lamps of illumination of registration plate (E19/1 and E19/2).
  6. Turn out screws (13) (on four from each party) and by means of the assistant remove a bumper.
  7. Installation is made upside-down.

The carpet panel of a covering of a floor (3) fastens to a cover (4) by means of glue.

  1. On models of the corresponding complete set (ET2 code) deactivate the service mode of the TELE AID system (see the Section Activation/deactivation of the Service Mode of System of an Emergency Call of TELE AID).
  2. In conclusion make reading of the DTC codes and cleaning of memory of system of onboard self-diagnostics by means of the STAR DIAGNOSIS scanner (6511 1801 00) (see the Head Sistemy of electric equipment of the engine).