dbba662c

12.1. Specifications

General information

Body

Serial designation 463
Design The body settles down on a curved frame of a ladder design with the increased rigidity to torsion, is connected to a frame bolts on rubber support
Bottom and niches of wheels Are covered with resistant protective mastic
Designation in the text of the Management of body racks (in front back) And, In and With

Mass-dimensional characteristics of the car, mm

See Specifications

Doors

Gaps of landing of side doors in body apertures, mm 0.5 ± 1
Back door vystupaniye size over surfaces of racks * 0 ÷ 1.5
Distance between a head of a fixing bolt and the landing plane of the external handle of a side door (A) (see illustrations of the Detail of installation of the external handle of a forward door and the Detail of installation of the external handle of a back door), mm 45

* Measurements are made in 30 mm below the upper edge, in 30 mm stiffening ribs and in 150 mm above bottom edge are lower

Assembly sizes of the traction coupling device

See Specifications

Efforts of tightening of threaded connections, Nanometer

Nuts of fastening of levers of screen wipers
  • Windshield
16
  • Back glass
15
Nuts of fastening of spindles of forward screen wipers on a back partition of a motive compartment 23
Bolts of fastening of a cross beam of fastening of a radiator on a car front 19
Bolts of fastening of a latch of the lock of a cowl 8
Fastening of spherical support of a door of a back 20
Bolts of fastening of a latch of the lock of a door of a back 9
Bolts of fastening of an assembly skobypanela of devices 20
Bolts/nut of fastening of the directing brackets of seat belts 35
Anchor bolts of seat belts 35
Bolts of fastening of buckles of seat belts 35
Bolts/nut of fastening of returnable drums of seat belts
  • Front seats
35
  • Back seats
25
Bolts of fastening of seats to a sled 60
Bolts of fastening of seatbacks 35
Bolts of fastening of the console of a perednegosidenye to a floor 62.5