dbba662c

11.4.9. Removal and installation of the mechanism of the electronic lock of a steering column

Details of installation of the mechanism of the electronic lock of a steering column (ELV)

37m — the Fixing bolt
37r — the Socket
71 — a column Sleeve

N26/5 — the Module of management of the electronic lock

 PERFORMANCE ORDER

  1. On models of the corresponding complete set (ET2 code) activate the service mode of system of an emergency call of TELE AID (see the Section Activation/deactivation of the Service Mode of System of an Emergency Call of TELE AID).
  2. Remove the lower section of finishing of the dashboard from the driver's party of the car (see the Head Kuzov).
  3. At the corresponding complete set remove a knee emphasis (see the Head Kuzov).
  4. Develop towards selection and take a fixing bolt (37m).
  5. Release the module of management of the electronic lock (N26/5) from a sleeve of a steering column (71)
  1. Turn on the auxiliary accumulator and connect it to the regular battery, then disconnect from the last a negative wire.

    7 — the Auxiliary accumulator
    8 — the Plug of a positive wire of the module
    9 — the Plug of a negative wire of the module
    W10 — Grounding of the battery
  1. Disunite the socket (37r).
  2. Installation is made upside-down.
  3. At the corresponding complete set deactivate the service mode of the TELE AID system.
  4. In conclusion make cleaning of the processor memory of system of onboard self-diagnostics (see the Head Sistemy of electric equipment of the engine).