dbba662c

10:12. Removal and installation of the lever of raising of the parking brake with the bearing bracket

Details of installation of the lever of the parking brake

1 — the Ventilating air duct
2 — Adjusting nuts
3 — the Bracket

4 — the Lever of the parking brake
5 — the Nut
X20/10 — the electrical wiring Socket

 PERFORMANCE ORDER

  1. Remove the central console (see the Head Kuzov).
  2. Remove a ventilating air duct (1).
  3. Disunite the socket of an electrical wiring (X20/10).
  4. Turn off both adjusting nuts (2).
  5. Give a nut (5) and remove the lever of the parking brake (4) assembled with the bearing bracket (3).
  6. Installation is made upside-down.
  7. In conclusion adjust the drive of the parking brake with application of a dynamometer (see the Section Adjustment of the Drive of the Parking Brake).